
The Harvest is Ripe for the Picking
Over the years I have struggled with the account of the adulterous woman, I focused so much on the woman and the crowd, I didn’t read it in context of what was happening right before the account, so I didn’t see the full picture of it until I took the time to really study it. I think we can do this with a lot of the accounts of the Bible. That is why it is so important for us to study the Bible for ourselves so that we can fully understand what God has for us in His Word.
We will be looking at John 8:1-11, the story of the adulterous woman. There are a few details and context I would like to bring up before we jump into the story. Jesus and the disciples had just celebrated the Feast of Tabernacles.
This feast began on 15th Tishri (September/October) and lasted seven days. It celebrated the first gathering of the fruit and grain harvests and also God’s provision for his people during their wilderness journey from Egypt to the promised land. It was a time for the people of God to be joyful!
While others in his group went home, Jesus went to Mount of Olives, which is located near Jerusalem and was thought to have been Jesus’ primary residence. Let’s look at the first few verses.
The Woman Caught in Adultery
“They went each to his own house, 1 but Jesus went to the Mount of Olives. 2 Early in the morning he came again to the temple. All the people came to him, and he sat down and taught them. 3 The scribes and the Pharisees brought a woman who had been caught in adultery, and placing her in the midst…“
Let’s take a moment to look at what is happening in these first few verses. Jesus is now back at the temple and is surrounded by people who he is teaching when “scribes and Pharisees” bring a woman who had been caught in adultery before all of them.
Scribes were part of the Pharisees, but they were not equals. They held the roles of lawyer, ethicist, theologian, and jurist. In this situation, their presence allows the decisions of what happens to the woman to be a legal proceeding outside of the courtroom. Although it might seem the woman is on trial, it is truly Jesus who they are judging. They are not going to judge his words, but his very actions in this trail. Let’s keep reading.
4 they said to him, “Teacher, this woman has been caught in the act of adultery.
In the Jewish law, this accusation would require an eyewitness, which we know by the words used, “in the act” that there were indeed eyewitnesses. It is also interesting to note that the scribes and Pharisees call Jesus as “teacher” which mostly only the disciples have used leading up to now. They are trying to trap Jesus in responding outside of their own “teachings.” Let’s read on.
5 Now in the Law, Moses commanded us to stone such women. So, what do you say?”
The scribes and Pharisees have part of the law correct, but the law in its entirety says both the man and woman should be put to death, and stoning is only mentioned in the law if the woman is a virgin pledged to be married. So, not only are they confusing all the people in the crowd, but they are trying to trick Jesus into taking action that could cause the end of his ministry in the temple and go against the actual law.
6 This they said to test him, that they might have some charge to bring against him. Jesus bent down and wrote with his finger on the ground.
The writer makes it obvious at this point that Jesus is the one on trial, that they are simply using this woman for the greater end game of having legitimate accusations against Jesus. But what did Jesus do? He calmly bent down and wrote with his finger on the ground.
There are so many people who focus on what Jesus could have been writing on the ground, guessing it could be the sins of the people in the crowd, or the law of Moses, and so on… but the key to this passage, this observation, was not what was written by Jesus but that he used his finger, just as God used His finger to write the 10 commandments in Deuteronomy 9:10:
10 And the Lord gave me the two tablets of stone written with the finger of God, and on them were all the words that the Lord had spoken with you on the mountain out of the midst of the fire on the day of the assembly.
The scribes and Pharisees didn’t realize that they were questioning the author and creator of the law, the one whose finger wrote on the tablet, the one who knew their hearts. The finger writing in the ground that day was none other than the finger of God.
7 And as they continued to ask him, he stood up and said to them, “Let him who is without sin among you be the first to throw a stone at her.” 8 And once more he bent down and wrote on the ground.
I think the scribes and Pharisees knew at this point they could not use his response against anyone but themselves. They had been outwitted, overthrown, and convicted to the core. They each left the presence of Jesus until it was only he and the woman. It says that the older ones left first. The wise of the group, the ones who knew the Lord longest and felt the conviction heavy. They led by example for those in the crowd who thought they might just be sinless enough to throw a stone. Eventually, they all walked away.
9 But when they heard it, they went away one by one, beginning with the older ones, and Jesus was left alone with the woman standing before him. 10 Jesus stood up and said to her, “Woman, where are they? Has no one condemned you?” 11 She said, “No one, Lord.”
I really believe this is a beautiful picture of God’s grace! I once read a book (I wish I could remember which one it was) but the author said (in my own paraphrase), “Isn’t it amazing how we can judge people on a daily basis, yet God gives us a lifetime before he judges us.” I think of that when I read this story. Did the woman deserve punishment? Yes, she sinned according to the law, but Jesus knew her life was not over yet, she had time to change, to make right what was wrong. He gave her hope, he became her light, her savior.
And Jesus said, “Neither do I condemn you; go, and from now on sin no more.“
Although Jesus showed her grace in this sinful situation, he followed up by a command to sin no more. God is full of grace and mercy, but he is also just. We must not forget that. We will reap what we sow. We don’t know what happened to the woman, she may have sinned again in the same ways, or she may have changed completely. That is for God to judge, for God to know, and for her to live with for eternity.
Here are some things to think about:
- Have I wasted the gracious moments Jesus has given me by sinning again?
- Do I judge others daily? How does it change my thinking to know that God ultimately judges us after we have lived out our lives?
- How long would it have taken me to leave the crowd and walk away that day?
- Have I ever acted like the scribes and Pharisees and tried to trick someone into saying or doing the wrong things?
- Imagine being the woman in the story, then go back and imagine being a scribe or Pharisee, then go back and read again and imagine to be a person in the crowd, then finally go back and imagine you are Jesus. What stands out the most to you when you take the time to see the story in each light?
The people of God had gone through over 400 years of silence from God before Jesus came and put on flesh (between the Old and New Testaments). They had been wondering in the wilderness for many years. God sent Jesus just when the harvest was ripe and when hearts were ready for the taking. I do not think it is by accident that the Feast of the Tabernacle was mentioned right before this story. God shows up. When the world thinks he’s not going to, he shows up. He is not like us, and his ways are not our ways. We see this in the story. We know from our own lives and our own stories that God is not like us. He is wonderful, awesome, creative, unexpected, loving, and we can cherish the times our lives have been blessed by Him! He comes when the harvest is ripe for the picking! He comes to give hope, to be a light to the world, a world full of darkness, sadness, sin, depression, anxiety… He comes to give hope! That hope gives us JOY!
Jesus was this woman’s hope- but not just hers…. He is the hope for all of us, the lost, the found, the hurting, the suffering, the joyful, the sick. Let him be your hope today, let him fill you with the JOY that can only come from above… the JOY that will get you through the hard times, the JOY that will bring you closer to understanding His purpose for your life!

14 Comments
Kristin Todd
This was beautifully written.
Amanda
Thank you JB! If you email me I can get an order processed for you. Looking forward to hearing from you soon!
A.Welch
Carol
Live the beautiful card I purchased at the Creation Myseum – want more
Amanda
Thank you so much! You can find my greeting cards in “the shop” on my website. I appreciate your kind words and support! God bless!
Kathleen Cleveland
Wow, I cried when you pointed out Jesus’ finger was the same finger that wrote the law they were twisting to trap Him just as satan had…
I came here hoping to purchase some of your work I’d seen at the Ark but they were out of and got this beautiful gift as the Holy Spirit compelled me to read this! <3
Sincerely,
Kathleen
Amanda
welch.amanda83@gmail.com
Mona Bowman
I too love what you said about Jesus using his finger and referring back to the 10 commandments!!
I purchased a couple of your prints at the Ark Encounter recently and look forward to more the next time we get to visit.
Blessings to you!
Yorkshire Terrier Zucht
Comment:
Thank you for sharing this insightful and thought-provoking perspective on the
story of the adulterous woman in John 8:1-11.
Your analysis of the context and the roles of the scribes, Pharisees,
and Jesus Himself sheds new light on this well-known passage.
Your point about the importance of studying the Bible in context is well taken.
It is all too easy to focus on individual verses or stories without
considering their broader context, and this
can lead to misunderstandings or oversimplifications.
Your emphasis on the need to understand the full picture
of God’s Word is a valuable reminder for all of us.
I appreciate your focus on the theme of grace in this story.
It is striking to see how Jesus showed compassion and mercy to the
woman, while also calling her to repentance and a changed life.
This balance between grace and truth is a powerful example for us to follow in our own lives.
Your reflection on the question of how long it would take us to leave the crowd
and walk away, as the scribes and Pharisees did, is a challenging
one. It is easy to get caught up in the opinions and judgments of those around us, but Jesus calls
us to a higher standard. May we all be quick to follow His example in standing up for what
is right and showing compassion to those who need it.
Thank you again for sharing this thoughtful and inspiring reflection on the story of the adulterous woman. May
we all be challenged and encouraged by the example of Jesus in this passage.
Paito SDY Lotto
Howdy! This blog post could not be written any better!
Going through this article reminds me of my previous
roommate! He continually kept preaching about this.
I most certainly will send this information to him.
Pretty sure he will have a very good read. Thanks for sharing!
Live Draw HK
Hi! I know this is kinda off topic nevertheless I’d figured I’d ask.
Would you be interested in exchanging links or maybe guest authoring a blog article or vice-versa?
My site discusses a lot of the same topics as yours and I believe we could greatly benefit
from each other. If you are interested feel free to send me an email.
I look forward to hearing from you! Terrific blog by the way!
Home Water Filter
Very great post. I just stumbled upon your blog and wanted to say that I’ve truly
enjoyed browsing your weblog posts. In any case
I’ll be subscribing for your feed and I am hoping you write once more very soon!
Live Draw Macau
My spouse and I stumbled over here different page and thought
I may as well check things out. I like what I see so now i’m
following you. Look forward to looking at your
web page repeatedly.
StevenaPerm
Your comment is awaiting moderation.
UT-301М – обновленная модель толщиномера UT-301, в новом эргономичном корпусе из ABS пластика https://www.ndt-club.com/product-925-komplekt-specialista-vik-komplektaciya-ao-niiin.htm
Толщиномер UT-301М предназначен для контроля стенок сосудов, труб, котлов и других изделий в диапазоне от 0,5 до 300мм, а также для измерения скорости УЗК колебаний https://www.ndt-club.com/product-729-flaw-finder-type-a-helling-postoyannii-magnit.htm
Работает по: черным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/product-885-tk-5-01ms-termometr-kontaktnii-s-pogryjaemim-zondom.htm
измерение: 3000 микронШаг измерений: 1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-838-kalibrovochnii-obrazec-ucb-114.htm
функции: фонарикПроизводство: ПольшаГарантия: 1 год
Портативный высокоточный многофункциональный ультразвуковой толщиномер TT310 (комплект) предназначен для измерения толщины различных изделий путем сканирования изделия при помощи ультразвука
Толщиномер ТМ-20МГ4 измеряет полную толщину покрытия (цинк + лакокрасочное покрытие) только на ферромагнитном основании (сталь и ее сплавы) https://www.ndt-club.com/product-412-komplekt-kvk-komplekt-dlya-vizyalnogo-kontrolya.htm
Выделить отдельно толщину галванического покрытия и толщину лакокрасочного покрытия не может https://www.ndt-club.com/product-582-ydt-08-yltrazvykovoi-tolshinomer.htm
StevenaPerm
Your comment is awaiting moderation.
Здравствуйте https://www.ndt-club.com/product-754-mf-510-akascan-ferritometr.htm
Необходимо измерить толщину слоя огнезащитного покрытия на электрическом кабеле https://www.ndt-club.com/product-604-dami-s09-mnogofynkcionalnii-defektoskop.htm
Каким прибором можно произвести такое измерение https://www.ndt-club.com/product-562-metolab-103-stacionarnii-tverdomer-po-rokvelly.htm
Заранее спасибо https://www.ndt-club.com/proizvoditeli-32-oktanta.htm
Прибор TT 211 разработан специально для автомобильной промышленности https://www.ndt-club.com/product-870-etaloni-chyvstvitelnosti-dlya-rentgenografii.htm
Данный прибор подходит для измерения толщины краски https://www.ndt-club.com/product-625-a1208-tolshinomer-yltrazvykovoi.htm
Принцип измерения – магнитная индукция https://www.ndt-club.com/product-876-plastini-iz-chernoi-jesti-dlya-ispitanii.htm
Диапазон измерений до 1250 мкм, простая калибровка по нулевой точке https://www.ndt-club.com/product-714-preobrazovateli-dlya-tolshinomerov-ge-krautkramer.htm
Высокая точность и скорость сбора данных, малый размер и вес https://www.ndt-club.com/produkcija-164-elektromagniti.htm
2 Неправильно была проведена калибровка прибора https://www.ndt-club.com/product-993-emt40001-ema-preobrazovatel.htm
Если были произведены ошибочные действий в процессе установок нуля и верхнего предела измерений, то для возврата к исходной характеристике преобразователя необходимо при включенном приборе одновременно нажать кнопки и удерживать их в нажатом состоянии несколько секунд https://www.ndt-club.com/product-759-tr300-izmeritel-sherohovatosti.htm
StevenaPerm
Your comment is awaiting moderation.
УЗ преобразователь имеет острую характеристику направленности излучения и приема ультразвука, поэтому толщина изделия определяется непосредственно под местом установки преобразователя https://www.ndt-club.com/product-629-id-92nm-v-2-impedansnii-defektoskop.htm
Если поверхность материала, противоположная той, на которую установлен УЗ преобразователь, имеет впадины, то УЗ импульсы отражаются от них и толщина определяется как кратчайшее расстояние от внешней поверхности до этих впадин https://www.ndt-club.com/news-45.htm
Работает по: черным и цветным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/product-585-korsar-16k-sistema-nizkochastotnogo-elektromagnitnogo-kontrolya.htm
измерение: 2000 микронШаг измерений: 0,1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-508-ti1-zond-portativnii-techeiskatelnii-kompleks.htm
функции: датчик оцинковкиПроизводство: КитайГарантия: 1 год
Работает по: черным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/product-612-df5012-ds1-yltrazvykovoi-preobrazovatel-dlya-kontrolya-rezbovoi-chasti.htm
измерение: 5000 микронШаг измерений: 1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-468-yfo-3-20f-oblychatel-yltrafioletovii-portativnii.htm
функции: фонарикПроизводство: ПольшаГарантия: 1 год
https://forumsadovodov.com.ua/memberlist.php?mode=viewprofile&u=66936
You are so cool! I do not think I’ve read something
like this before. So nice to find another person with original thoughts
on this subject matter. Seriously.. many thanks for starting this up.
This web site is one thing that’s needed on the web,
someone with some originality!
StevenaPerm
Your comment is awaiting moderation.
Работает по: черным и цветным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/fotogalereya-1.htm
измерение: 2000 микронШаг измерений: 0,1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-840-sendast-p121-seriya-mm-nizkoprofilnie-yltrazvykovie-iznosostoikie-naklonnie-preobrazovateli.htm
функции: нетПроизводство: КитайГарантия: 1 год
Работает по: черным металламРабочая температура: -40°С до +50°СМакс https://www.ndt-club.com/produkcija-230-rashodnie-materiali-dlya-magnitnoi-defektoskopii-syspenzii.htm
измерение: 2000 микронШаг измерений: 20 микронПодсветка экрана: НетДоп https://www.ndt-club.com/product-944-datchik-pyti-dlya-rychnogo-kontrolya-ksm-20.htm
функции: нетПроизводство: ПольшаГарантия: 1 год
StevenaPerm
Your comment is awaiting moderation.
Также см https://www.ndt-club.com/news-4.htm
ТК (Деловые Линии и другими) по всей территории РФ https://www.ndt-club.com/produkcija-222-luksmetri.htm
Прочую информацию по заказу — см https://www.ndt-club.com/product-79-ad-42ip-defektoskop-akysticheskii.htm
официальный сайт ГК Теплоприбор раздел Приборы и системы контроля уровня https://www.ndt-club.com/produkcija-240-rentgenflyorescentnie-analizatori.htm
Работает по: черным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/product-436-ips-mg4-04-izmeritel-prochnosti-betona-sklerometr.htm
измерение: 2000 микронШаг измерений: 1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-942-em5000-ema-tolshinomer.htm
функции: нетПроизводство: ТайваньГарантия: 1,5 года
Малогабаритный ультразвуковой толщиномер ТУЗ-3 используется для контроля толщины разных изделий из металлов и неметаллов, включая те, измерять которые возможно только с одной стороны https://www.ndt-club.com/product-449-disto-d510-leica-lazernii-dalnomer.htm
Толщиномер применяется в любых промышленных отраслях https://www.ndt-club.com/product-898-m-2-v-7-shlifovalno-polirovalnii-stanok-230-i-250-mm.htm
Ультразвуковой толщиномер WT100A позволяет за короткий промежуток времени провести контроль толщины любых материалов, пропускающих ультразвук: металл, пластик и даже стекл не подходит для измерения толщины чугуна, рассеивающих материалов, а также нерасщепленных многослойных композитных материалов (см https://www.ndt-club.com/product-953-visokotemperatyrnii-gel-mr-755.htm
ниже подробную информацию об измерении толщины различных материалов) https://www.ndt-club.com/product-574-mvp-2m-mnogofynkcionalnii-vihretokovii-pribor-ferritometr-izmeritel-elektroprovodnosti-tolshinomer-pokritii.htm
Ультразвуковой толщиномер А1207C является самым маленьким толщиномером, совмещающим удобство в эксплуатации и все основные функции современного толщиномера https://www.ndt-club.com/product-946-symka-rft-filipok.htm
Применяется в диапазоне толщин от 10 до 250мм
StevenaPerm
Your comment is awaiting moderation.
Температурный режим соответствует российским реалиям: от +50 вплоть до –25 градусов https://www.ndt-club.com/product-30-uniscope-akystiko-emissionnaya-sistema-dvyhkanalnaya.htm
Это позволяет эксплуатировать, не ориентируясь на погодные ограничения https://www.ndt-club.com/produkcija-311-datchiki-pyti-dlya-far-i-cfa.htm
Не каждый автолюбитель меняет машину настолько часто, чтобы постоянно иметь в арсенале устройство для определения битой машины https://www.ndt-club.com/product-890-razdelno-sovmeshennii-preobrazovatel-d1573-6-0a0d6cl-dlya-tolshinomera-a1207.htm
Многие покупают автомобиль на долгие годы и тратить деньги на покупку толщиномера нет большого смысла https://www.ndt-club.com/product-686-yd2-70-yltrazvykovoi-defektoskop.htm
Поэтому мы можем предложить Вам услугу – толщиномер в аренду https://www.ndt-club.com/product-796-pos-60mg4-izmeriteli-prochnosti-betona.htm
Ультразвуковой толщиномер WT100A позволяет за короткий промежуток времени провести контроль толщины любых материалов, пропускающих ультразвук: металл, пластик и даже стекл не подходит для измерения толщины чугуна, рассеивающих материалов, а также нерасщепленных многослойных композитных материалов (см https://www.ndt-club.com/product-987-tpc-7t-dinamicheskii-miniaturnii-tverdomer.htm
ниже подробную информацию об измерении толщины различных материалов) https://www.ndt-club.com/produkcija-320-zaryadnie-ystroistva-dlya-tolshinomerov.htm
-толщину цинкового покрылия на листовой углеродистой стали толщиной от 0,45 до 2 мм если она имеет дополнительное антикоррозионное лакокрасочное или порошковое покрыти
StevenaPerm
Your comment is awaiting moderation.
На замер показателей одной машины может понадобится около 30 минут https://www.ndt-club.com/news-56.htm
Можно, конечно, делать замеры каждые 5 см, но самым рациональным является квадратный метод с шагом 15-20 см https://www.ndt-club.com/product-456-th210-tverdomer-rezini-i-plastika-po-shory-d.htm
Даже если был более мелкий ремонт, он принципиально не влияет на общее качество лакокрасочного покрытия и состояние кузова в целом https://www.ndt-club.com/otzyvy.htm
Работает по: черным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/product-719-v7-1833-obrazci-sherohovatosti-poverhnosti-sravneniya-parametr-rz.htm
измерение: 2000 микронШаг измерений: 1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-936-symka-t12.htm
функции: нетПроизводство: ТайваньГарантия: 1,5 года
официальный сайт ГК — это гарантия качества, сроков, справедливой стоимости и прайс-листа с актуальными ценами* (любое предложение на сайте не является публичной офертой, описания и цены приведены в информационных целях и могут незначительно отличаться от реальных характеристик, изображение товара дано только в качестве иллюстрации) https://www.ndt-club.com/product-388-d2x-yniversalnii-tolshinomer-pokritii-fe-nfe.htm
Булат 1S предназначен для измерения толщины изделий из конструкционных металлических сплавов, при одностороннем доступе к ним https://www.ndt-club.com/product-468-yfo-3-20f-oblychatel-yltrafioletovii-portativnii.htm
В толщиномере Булат 1S используется контактный способ обеспечения акустического контакта прижимом контактной поверхности преобразователя к поверхности контролируемого объекта без сканирования https://www.ndt-club.com/news-26.htm
Нередко, во время тестирования необходимо делать замеры на поверхностях неоднородных по своему составу https://www.ndt-club.com/proizvoditeli-12-lych.htm
Как вариант: на обычный металл нанесено напыление цветного металла и уже на него шпаклевка и лакокрасочное покрытие https://www.ndt-club.com/produkcija-296-ocenka-zapilennosti.htm
Tourist Nature blog
This is very interesting, You are a very skilled blogger.
I have joined your feed and sit up for looking
for more of your excellent post. Additionally, I’ve shared
your web site in my social networks
StevenaPerm
Your comment is awaiting moderation.
Обновлено 14 января 2017 https://www.ndt-club.com/product-878-far-fazirovannie-antennie-reshetki-32-h-elementnie.htm
https://www.ndt-club.com/news-41.htm
https://www.ndt-club.com/index.php?z=UDT-RF&button1=%CF%CE%C8%D1%CA&pd=5
б https://www.ndt-club.com/product-815-mpb-2-v7-mikroskop-otschyotnii-brinell.htm
у https://www.ndt-club.com/news-90.htm
\ уд-11пу экон-2 б https://www.ndt-club.com/product-447-disto-x310-leica-lazernii-dalnomer.htm
у https://www.ndt-club.com/proizvoditeli-2-aka-skan.htm
по 10т https://www.ndt-club.com/product-738-a1207u-yltrazvykovoi-tolshinomer.htm
р https://www.ndt-club.com/product-316-equotip-bambino-2-portativnii-dinamicheskii-tverdomer.htm
\ кабели и преобразователи к уд и толщиномерам https://www.ndt-club.com/product-703-inatest-d-dinamicheskii-tverdomer.htm
Анализатор для дизельных двигателей К-290 по 10 т https://www.ndt-club.com/product-759-tr300-izmeritel-sherohovatosti.htm
р https://www.ndt-club.com/product-69-x-lum-negatoskop-68-000-kd-m2.htm
Вакуумные насосы с элдвигателями б https://www.ndt-club.com/proizvoditeli-30-flir.htm
у в https://www.ndt-club.com/product-998-emap-s7392-4-0a0d10es.htm
https://www.ndt-club.com/product-154-tr110-izmeritel-sherohovatosti.htm
https://www.ndt-club.com/produkcija-188-rentgenovskaya-plenka.htm
Перед проведением измерений толщины посредством толщиномера WT100A очистите поверхность от пыли, грязи и ржавчины, а также от нанесенных на нее покрытий, например, краски https://www.ndt-club.com/product-614-visokotemperatyrnaya-kontaktnaya-smazka-olympus-h-2-high-temperature.htm
Понизьте шероховатость поверхности: чрезмерная шероховатость может привести к искажению результатов измерений либо к невозможности считывания данных https://www.ndt-club.com/product-476-indykcionnii-nagrevatel-easytherm-3-5-hq.htm
Перед проведением измерений необходимо максимально сгладить поверхность посредством пескоструйной обработки, шлифовки, полировки или с помощью связующего вещества высокой вязкости https://www.ndt-club.com/product-966-liniya-zaderjki-smennaya-klxx-4r.htm
Данный прибор используется для измерения толщины различных конструкций, как надводных, так и подводных https://www.ndt-club.com/product-383-positest-at-a-cifrovoi-avtomaticheskii-adgezimetr-positest-at-a-defelsko.htm
Сами конструкции могут являться и металлическими, и не металличекими, а также могут быть подвергнуты корродированнию, изъеданию, накипи, гранулированнию и так далее, в процессе эксплуатации для определения их коррозионного состояния или после изготовления https://www.ndt-club.com/product-649-mentor-visual-iq-videoendoskop.htm
StevenaPerm
Your comment is awaiting moderation.
Работает по: черным металламРабочая температура: -40°С до +50°СМакс https://www.ndt-club.com/product-531-sendast-p111-prd-prt-pryamie-sovmeshennie-preobrazovateli-s-liniei-zaderjki.htm
измерение: 2000 микронШаг измерений: 20 микронПодсветка экрана: НетДоп https://www.ndt-club.com/bu_pribori.htm
функции: нетПроизводство: ПольшаГарантия: 1 год
2 Неправильно была проведена калибровка прибора https://www.ndt-club.com/product-738-a1207u-yltrazvykovoi-tolshinomer.htm
Если были произведены ошибочные действий в процессе установок нуля и верхнего предела измерений, то для возврата к исходной характеристике преобразователя необходимо при включенном приборе одновременно нажать кнопки и удерживать их в нажатом состоянии несколько секунд https://www.ndt-club.com/product-959-preobrazovatel-dl2-5p6-2-5-mgc.htm
Работает по: черным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/news-86.htm
измерение: 3000 микронШаг измерений: 1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-601-mf-51nc-ferritometr-lokalnii.htm
функции: фонарикПроизводство: ПольшаГарантия: 1 год
Внимание! В условиях напряженной международной обстановки и текущей экономической ситуации, возникла значительная неопределенность с курсами ЦБ и поставками комплектующих, что влияет на сроки производства, текущие цены и саму возможность поставки некоторых видов продукции https://www.ndt-club.com/product-837-kalibrovochnii-obrazec-ucb014.htm
Толщиномер УДТ-40 – универсальный ультразвуковой толщиномер с высокой точностью и достоверностью контроля https://www.ndt-club.com/product-69-x-lum-negatoskop-68-000-kd-m2.htm
Наличие А-скана исключает такие типичные ошибки при измерении толщины, как удвоение показаний, а В-скан позволяет наблюдать профиль дна изделия https://www.ndt-club.com/product-819-v7-557-tolshinomer-pokritii.htm
StevenaPerm
Your comment is awaiting moderation.
На восьмом месте выстраивается ETARI ET-333, с новым установленным чипом, который позволяет устройству быстрее обрабатывать данные https://www.ndt-club.com/product-912-panel-prozrachnaya-dlya-ocenki-razmerov-indikacii-defektov.htm
Благодаря широкому диапазону, прибор осуществляет измерения до 2 мм, а информация результата выводится за секунду и отображается на дисплее толщиномера https://www.ndt-club.com/proizvoditeli-9-proceq.htm
Этот аппарат сможет измерить любую толщину автопокрытия, такие как сталь или чугун, и с точностью определит в каком состоянии измеряемая часть автомобиля https://www.ndt-club.com/produkcija-278-impylsnie-vihretokovie-defektoskopi.htm
ETARI ET-333, имеет удобную и надежную конструкцию, обеспечит длительную работу, а так же точные и стабильные измерения при любых погодных условиях https://www.ndt-club.com/product-456-th210-tverdomer-rezini-i-plastika-po-shory-d.htm
Обновлено 27 августа 2018Техническая характеристика толщиномер покрытий магнитный МТ2003 от ООО-Квазар, г https://www.ndt-club.com/produkcija-237-izmeritelnii-instryment-i-shabloni.htm
Уфа предназначен для измерения толщин немагнитных покрытий, нанесенных на ферромагнитное основание https://www.ndt-club.com/news-79.htm
https://www.ndt-club.com/product-721-sendast-p111-plast-pryamie-sovmeshennie-preobrazovateli-dlya-kontrolya-plastikov.htm
https://www.ndt-club.com/product-284-opravka-s-sharikom-dlya-izmereniya-tvyordosti-po-metody-rokvelly-216-3-175-mm.htm
https://www.ndt-club.com/product-778-v7-220-vibrometr-portativnii.htm
Универсальный толщиномер T-GAGE IV ММ, оснащенный сильнодемпфированным раздельно-совмещенным преобразователем, позволяющий проводить измерения толщины материалов, находящихся под защитным покрытием https://www.ndt-club.com/product-363-ysd-50-ips-yltrazvykovoi-defektoskop.htm
У нас вы можете также заказать цифровой толщиномер, тоже отнесенный к профессиональному классу, поскольку такой тип обеспечивает высокую точность, воспроизводимость и повторяемость https://www.ndt-club.com/news-11.htm
Цифровые краскомеры также работают магнитных и немагнитных основаниях https://www.ndt-club.com/product-980-avm-yf-400k-yltrafioletovii-fonar.htm
2 https://www.ndt-club.com/produkcija-49-rentgenograficheskie-kroyleri.htm
По умолчанию выбирается материал с номером (сталь) и соответствующее ему значение скорости ультразвука 5900 м/с https://www.ndt-club.com/product-946-symka-rft-filipok.htm
Значение рекомендуемой скорости ультразвука и тип материала с соответствующим ему порядковым номером выбираются из таблицы 1 https://www.ndt-club.com/product-984-avm-yf-80s-ctacionarnaya-yltrafioletovaya-lampa.htm
StevenaPerm
Your comment is awaiting moderation.
Не каждый автолюбитель меняет машину настолько часто, чтобы постоянно иметь в арсенале устройство для определения битой машины https://www.ndt-club.com/proizvoditeli-32-oktanta.htm
Многие покупают автомобиль на долгие годы и тратить деньги на покупку толщиномера нет большого смысла https://www.ndt-club.com/product-708-rft-magnetic-belt-magnitnii-krepejnii-remen.htm
Поэтому мы можем предложить Вам услугу – толщиномер в аренду https://www.ndt-club.com/produkcija-305-ystroistva-i-prisposobleniya-rk.htm
В этой статье Вы узнаете, что такое толщиномер ЛКП и для чего он нужен https://www.ndt-club.com/proizvoditeli-29-metolab.htm
Вы сможете легко определить, была ли машина в ремонте или нет https://www.ndt-club.com/product-822-v-237-yltrazvykovoi-tolshinomer.htm
Для успешной проверки лакокрасочного покрытия автомобиля Вам необходимо приобрести прибор модели ЕТ компании Евротрейд https://www.ndt-club.com/product-464-time3221-izmeritel-sherohovatosti.htm
Купив такой прибор, Вы сможете удостовериться, попадали ли машина в аварию или нет https://www.ndt-club.com/product-570-metolab-502-stacionarnii-tverdomer-po-mikro-vikkersy.htm
Рассеивающие материалы: Некоторые материалы, имеющие волокна, поры и крупные частицы, вызывают сильное рассеивание энергии ультразвуковых волн, что приводит к искажению значений или невозможности их получения (обычно искаженное значение меньше фактического), поэтому толщиномер WT-100A не подходит для измерения толщины рассеивающих материалов https://www.ndt-club.com/product-1001-emap-s7694-3-0a0r18x12es.htm
Работает по: черным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/product-242-mtr-komplekt-mer-tvyordosti-rokvella.htm
измерение: 2000 микронШаг измерений: 1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-67-tkm-459m-tverdomer-yltrazvykovoi.htm
функции: подключение к телефонуПроизводство: РоссияГарантия: 1 год
Добрый день, подскажите пожалуйста, требуется получать какие-либо допуски на данный прибор для проведения обследования зданий и сооружений, именно в рамках обследования https://www.ndt-club.com/produkcija-259-meri-i-obrazci-sherohovatosti.htm
Т https://www.ndt-club.com/product-51-temp-2-tverdomer-dinamicheskii.htm
е https://www.ndt-club.com/produkcija-242-emissionnie-spektrometri.htm
для обычного обследования, а не промбезопасности https://www.ndt-club.com/product-698-nabor-vik.htm
Требуется ли создавать лабораторию НК для обследования зданий и сооружений https://www.ndt-club.com/news-49.htm
StevenaPerm
Your comment is awaiting moderation.
Устали от постоянных ? Часто не можете из дома (дачи, офиса) совершать звонки? Значит, пришло время облегчить себе жизнь и купить усилитель сигнала сотовой связи https://www.ndt-club.com/product-898-m-2-v-7-shlifovalno-polirovalnii-stanok-230-i-250-mm.htm
Это устройство, как правило, состоит из следующих компонентов:
Тэги:, Об авторе Комментировать (4) (2) (1) (1) ] (21) (5) (2) (8) (5) (1) ] (4) (1) (1) (2) ] (1) (1) ] (8) (1) (1) (3) (1) (2) ] (2) (1) (1) ] (10) (2) (1) (1) (1) (2) (2) (1) ] (6) (1) (1) (2) (2) ] (5) (3) (2) ] (12) (2) (1) (1) (1) (1) (1) (1) (1) (2) (1) ] (6) (2) (1) (1) (1) (1) ] (6) (1) (1) (4) ] (4) (2) (1) (1) ] (11) (2) (9) ] (17) (1) (1) (1) (4) (7) (2) (1) ] (9) (1) (7) (1) ] (1) (1)
Обновлено 9 января 2017 https://www.ndt-club.com/product-164-meri-tvyordosti-rezini-i-plastika-po-shory-a.htm
https://www.ndt-club.com/news-34.htm
https://www.ndt-club.com/product-543-foundry-master-lab.htm
/ Удар-Тестер, Измерители прочности покрытий и металлов вытяжкой Прибор Эриксена, Аппликаторы, Толщиномеры покрытий Градиент ТП-2000 на сталях, алюминии, титане, дереве, асфальте https://www.ndt-club.com/product-302-antennaya-reshetka-m9170-4-0v60r26x10cs-dlya-a1550introvisor.htm
https://www.ndt-club.com/product-601-mf-51nc-ferritometr-lokalnii.htm
https://www.ndt-club.com/news_page-2.htm
StevenaPerm
Your comment is awaiting moderation.
По цене производителя отгружается продукция как собственного производства, так и наших партнёров — ведущих заводов — производителей КИПиА, аппаратуры регулирования, систем и оборудования для управления технологическими процессами АСУ ТП (многое имеется в наличии на складе или может быть изготовлено и отгружено в кратчайшие сроки) https://www.ndt-club.com/product-861-peleng-115-yltrazvykovoi-defektoskop.htm
Толщиномер Константа К6Ц позволяет проводить измерение глубины пазов и оценку шероховатости поверхности после пескоструйной или дробеструйной обработки, контролировать климатические условия https://www.ndt-club.com/product-802-dykat-300-magnitoporoshkovii-defektoskop.htm
Работает по: черным металламРабочая температура: -25°С до +50°СМакс https://www.ndt-club.com/news-61.htm
измерение: 2000 микронШаг измерений: 1 микронПодсветка экрана: ЕстьДоп https://www.ndt-club.com/product-512-pocketmike-yltrazvykovoi-tolshinomer.htm
функции: нетПроизводство: ТайваньГарантия: 1,5 года
Номер материала отображается на индикаторе (11), а значение скорости ультразвука – на индикаторе (12) https://www.ndt-club.com/kompozity.htm
Выбор материала производится последовательным нажатием кнопки SELECT (6) https://www.ndt-club.com/produkcija-319-zaryadnie-ystroistva-dlya-defektoskopov.htm
Объем применения: измерение толщины любого хорошего проводника для ультразвуковых волн с верхней и нижней поверхностями, параллельными друг другу, таких как металл, пластик, керамика и стекло, может быть измерена с помощью прибора https://www.ndt-club.com/product-923-ars-n-avtomaticheskaya-proyavochnaya-mashina.htm
Например: алюминий, медь, золото, смола, вода, глицерин и т https://www.ndt-club.com/produkcija-306-far-i-cfa-yltrazvykovie-defektoskopi.htm
д https://www.ndt-club.com/product-23-gals-vd-103-vihretokovii-defektoskop-treshinomer.htm
Внутренние частицы чугуна слишком велики для этого прибора!